The SEA 7001G SEAWATCH is a six channel MF/HF Watchkeeping Receiver. When combined with the SEA SEACALL 7000, SEAWATCH permits continuous and automatic scanning of up to six DSC (Digital Selective Calling) distress and safety frequencies on the MF/HF bands. An internal decoder in the SEAWATCH 7001G "watches" for the dot pattern preamble that leads every distress message. When this dot pattern is detected, the SEAWATCH initiates a detailed distress detection procedure .
SEA has a world wide service network to support all of its GMDSS products. This ensures back-up support no matter where in the world your ship is operating. There has never been a better time to buy American engineering and manufacturing excellence backed by local service.
For the name of the dealer nearest you, please call (425)
771-2182 or visit our Dealer
Locater page.
SEA 7001G
SPECIFICATIONS
GENERAL |
|
---|---|
Primary Voltage: | 12 Vdc +30% -10% (13.6 Vdc nornlinal>, Isolated
chassis |
Current Drain: | 750 Millamperes |
Compliance: | Complies with CFR 47, Part 80, Subpart W, para. 80.1101 C.E.P.T. T/R 34-01 Annex XIII, IMO Resolution A 694 CCIR Recommendations 493-4 and 541-3 |
Mounting: | Any orientation |
Operating Temp.: | -20°C to +55°C |
Safe Compass Distance: | 1 meter |
Interconnect: | SEABUSSTM (SEA 330
Protocol) |
Panel Controls: | PWR, DIM, VOL, SCN, TST, 4M, 6M, 12M, 16M |
Panel Indicators: | Active channel Indicators, CALL Indicator, SCAN
indicator |
RECEIVER |
|
Operating Frequencies: | 2187.5, 8414.5, 4207.5, 6312, 12577 and 16804.5 kHz |
Circuitry: | Fully synthesized, double conversion |
Scan Watch: | All frequencies within 2 seconds |
Mode of reception: | F1B, J2B |
Sensitivity: | Error rate less than 10-2 at 1 uV |
Stability: | ±10 Hz |
Bandwidth : | 270-300 Hz (-6dB) |
Line Output: | 600 ohm balanced, -10 dBm to +10 dBm |
Specifications subject to change without notice or obligation. |